ABDT-CS Remote Display Ultrasonic Level Meter
Ultrasonic level meter is a non-contact, highly reliable, cost-effective, and easy to install and maintain on-site level measurement device based on the ultrasonic wave principle
Characteristics
Meausring range: Up to 15m
Accuracy: ± 0.2%
Process pressure: -0.02…0.1MPa
Process connection: Flange,G2” thread,bracket
Output signal: 4~20mA,RS485(optional)
Overview
ABDT-CS Remote display ultrasonic level meter has a brand-new signal processing technology, with the characteristics of safety, cleanliness, high accuracy, long life, stability and reliability, convenient installation and maintenance, and simple reading. It is widely used in petroleum, chemical industry, water treatment, water conservancy, steel, coal mine, electric power and food processing industries, and is suitable for various fields such as acid, alkali, salt, anticorrosion, high temperature and explosion protection. It can be connected with various brands of PLC systems or secondary control systems through 4~20 mA or RS485 (Modbus protocol) to provide real-time liquid level data for industrial automation.Features
- Stability and Reliability: The circuit design incorporates high-quality modules in the power supply section, and highly stable and reliable components are selected for critical parts
- Advanced Software Technology: Equipped with acoustic intelligent technology, the software performs smart echo analysis with no need for manual debugging, offering dynamic thinking and analysis capabilities
- High Accuracy: Provides a liquid level measurement accuracy of ±0.3% and features on-site anti-interference functionality
- Low Failure Rate: A non-contact instrument that does not come into direct contact with the liquid
- Comprehensive Protection: The instrument has an IP65 protection rating, while the circuitry includes isolation protection to prevent damage from short circuits, lightning strikes, and other issues
Application | Liquid level measurement |
Accuracy | ± 0.2% |
Meausring range | 0-5m, 0-10m, 0-15m |
Output signal | 4~20mA/1-5V/4-20mA+HART(optional) |
Process connection | Flange, G2” thread, bracket |
Transducer shell material | PA66+GF30 or PVDF |
Process temperature | -40~70℃ |
Process pressure | -0.02 to 0.1MPa |
Power supply | Two wire system 24V Four wire system 24V DC/220V AC |
Explosion proof grade | Ex d IIC T4 Gb |
Blind area | 5m range: 0.2m 10m range: 0.3m 15m range: 0.5m |
Emission angle | 15° |
Resolving power | 1mm |
Repeatability | ±3mm |
Protection grade | IP65 |
